Techrite Controls Australia Gas Safety Controls &
Combustion Systems

VIC 03 9549 4444  •  NSW 02 9624 4486  •  QLD 07 3807 9094
Dungs MPA 22 Automatic Burner Control
Dungs MPA 22 Automatic Burner Control
Automatic Burner Control with integrated valve proving and air/gas ratio control AS Approved (AGA Certificate No. 7616) ...
Dungs MPA 41 Automatic Burner Control
Dungs MPA 41 Automatic Burner Control
For atmospheric burners and fan burners Suitable for continuous operation Ionisation and gate inputs as flame detectors Extension module ...
Dungs VPM-VC Leakage Test Unit
Dungs VPM-VC Leakage Test Unit
Checks the tightness of burner gas shut-off valves LED indicators signal leaky valves Multifunction output (MFA) for direct output of various devi...
Honeywell U2 Series Flame Sensor
Honeywell U2 Series Flame Sensor
Integrated signal processor and viewing head with up to three sensors (UV Tron, solid state UV, and solid state IR) Independent configuration and adju...
Maxon Smartfire
Maxon Smartfire
Precise electronic control of air and fuel flow to the burner to maximize efficiency and minimize emissions simultaneously Maintain emissions o...
Maxon Smartlink MRV
Maxon Smartlink MRV
Precise and repeatable flow control optimizes fuel efficiency, enables accurate temperature control and lowers burner emissions. SMARTLINK MRV ...
Siemens LFE1 Burner Control
Siemens LFE1 Burner Control
AGA Certificate 2706 Class 2A and/or Class 2B The LFE1... is designed for the fully automatic control and supervision of single-stage, multi-stag...
Siemens LFL1 Series
Siemens LFL1 Series
AGA Certificate 2734 Class 2A and/or Class 2B For gas, oil or dual-fuel forced draft burners of medium to high capacity For multistage or modulating...
Siemens LGA Gas Burner Control
Siemens LGA Gas Burner Control
AGA Certificate 4075 Class 2Cb The LGA... are used for the startup and supervision of atmospheric gas burners of small to medium capacity (withou...
Siemens LGB  Burner Control
Siemens LGB Burner Control
AGA Certificate 4393 Class 2A and/or 2B The LGB... burner controls are used for the startup and supervision of 1- or 2-stage gas or gas / oil burner...
Siemens LGI16 Burner Control
Siemens LGI16 Burner Control
AGA Certificate 5403 Class 2A For use on industrial furnaces For burners in continuous operation Without fan control and air pressure supervision...
Siemens LGK16 Burner Control
Siemens LGK16 Burner Control
AGA Certificate 3861 Class 2A and/or 1A For gas, oil or dual-fuel forced draft burners of medium to high capacity With self-checking flame signal a...
Siemens LME Series Burner Controls
Siemens LME Series Burner Controls
AGA Certificate 7222 Class 2A, 2B, 2Ca, 2Cb LME... are used for the startup and supervision of 1- or 2-stage gas or gas/oil burners in intermittent...
Siemens LME7 Series Burner Controls
Siemens LME7 Series Burner Controls
AGA Certificate 7926 Class 2A or 2Ca The burner control LME7... is a microprocessor-based unit with matching system components for the control and su...
Siemens LMG Series Burner Controls
Siemens LMG Series Burner Controls
AGA Certificate 5829 Class 2A or 2Ca LMG... are designed for the startup and supervision of 1- or 2-stage gas or forced draft gas / oil burners in i...
Siemens LMV5.. Series Burner Controls
Siemens LMV5.. Series Burner Controls
AGA Certificate 6436 Class 1A and/or 2A LMV51... - Burner control with integrated fuel / air ratio control and load control for use with forced draft...
Siemens LOA2 / LOA3 Series Oil Burner Controls
Siemens LOA2 / LOA3 Series Oil Burner Controls
The LOA... are used for the startup, supervision and control of 1- or 2-stage forced draft oil burners in intermittent operation. Yellow-burning f...
Siemens QGO20 Oxygen Sensor
Siemens QGO20 Oxygen Sensor
The QGO20... is an oxygen sensor designed for acquiring the residual oxygen content of flue gases in heat generation plant burning natural gas or l...
Siemens QRA UV Flame Detection
Siemens QRA UV Flame Detection
The flame detectors are used for the supervision of gas flames, yellow- or blue-burning oil flames and for ignition spark proving. For use with b...
Siemens QRA4.U Flame Detector
Siemens QRA4.U Flame Detector
  The flame detector is used for the supervision of gas flames, yellow- or blue-burning oil flames and for ignition spark proving in intermitt...
Siemens QRB1/QRB3 Flame Detector
Siemens QRB1/QRB3 Flame Detector
The QRB... are designed for the supervision of yellow-burning oil flames in connection with burner controls type LAL..., LME7..., LMO..., LMV... an...
Siemens QRC1 Blue Flame Detector
Siemens QRC1 Blue Flame Detector
The QRC1... is a compact UV-sensitive blue-flame detector with an integrated preamplifier.  It is designed for frontal and lateral (90 degree...
Siemens QRI Infra Red Detector
Siemens QRI Infra Red Detector
Key features of the QRI... flame detectors: Detector with infrared-sensitive flame detecting element Integrated flame signal amplifier Designed f...